Features

• 4-20 mA, ± 10 V, TC & RTD Inputs
• NEMA 4X, IP65 Front
• Shallow Depth Case 3.6" Behind Panel
• Universal Power Supply 85-265 VAC
• Two Relays Option with Alternation & Time Delays
• 4-20 mA Analog Output Option
• 24 VDC @ 200 mA Transmitter Power Option
• RS-232, RS-422/485 Serial Communication Options
• Modbus® RTU Option & Free LabVIEW™ Driver
• Sunlight Readable Display
• 3 Year Warranty

• Display: 0.56" (14.2 mm) red LED, 4 digits (-1999 to 9999)
• Display Intensity: Eight user selectable intensity levels
• Front Panel: NEMA 4X, IP65; panel gasket provided
• Programming Methods: Four front panel buttons, cloning with Copy feature, PC with MeterView or LabVIEW software, and Modbus registers. Certified LabVIEW driver available.
• Noise Filter: Programmable 2 to 199 (0 will disable filter)
• Display Update Rate: Process/RTD: 3.7-5/sec; TC: 1.8-2.5/sec
• Overrange: Display flashes 9999
• Underrange: Display flashes -1999
• Recalibration: All inputs are calibrated at the factory; recalibration is recommended at least every 12 months.
• Max/Min Display: Stored until reset by user or meter is turned off.
• Password: Restricts modification of programmed settings.
• Non-Volatile Memory: Settings stored for a minimum of 10 years.
• Power Options: 85-265 VAC, 50/60 Hz; 90-265 VDC, 20 W max or 12-36 VDC; 12-24 VAC, 6 W max.
• Required Fuse: UL Recognized, 5 A max, slow-blow; up to 6 meters may share one fuse.
• Normal Mode Rejection: 64 dB at 50/60 Hz
• Isolation: 4 kV input/output-to-power line; 500 V input-to-output or output-to-24 VDC supplies
• Operating Temperature: 0 to 65°C
• Storage Temperature: -40 to 85°C
• Relative Humidity: 0 to 90% non-condensing
• Connections: Power & Signal: removable screw terminal blocks accept 12 to 22 AWG. Serial: RJ11 header, standard on all meters.
• Enclosure: 1/8 DIN, high impact plastic, 94V-0, color; gray
• Weight: 9.5 oz (269 g) (including options)
• UL File Number: E160849; 508 Industrial Control Equipment
• Warranty: 3 years parts & labor
• Extended Warranty: 1 or 2 years, refer to Price List for details.

• Inputs: Field selectable: 0-20 mA, 4-20 mA, 1-5 V, ±10 V
• Accuracy: ±0.05% FS ±1 count; square root: ±0.1% FS ±2 counts
• Function: Linear or square root
• Low-Flow Cutoff: 0 to 9999 (0 disables cutoff function)
• Decimal Point: Up to 3 decimals: d.ddd, dd.dd, ddd.d, or dddd
• Calibration: Scale without signal or calibrate with signal source
• Calibration Range: User programmable over entire range of meter
• Input Impedance: Voltage range: greater than 1 M?,
• Current range: 50-100 ?, varies with resettable fuse impedance
• Input Overload: Protected by automatically resettable fuse
• Temperature Drift: ±50 PPM/°C
• Transmitter Supply: Isolated, one or two transmitter supplies
  P1: 24 VDC ±10% @ 200 mA max (-1 option)
  P1 & P2: 24 VDC ±10% @ 200 mA & 40 mA max (-2 option)

• Inputs: Factory calibrated, field selectable: type J, K, T, or E thermocouples and 100 ? platinum RTD (0.00385 or 0.00392 curve)
• Resolution: 1°; type T: 1° or 0.1°
• Cold Junction Reference: Automatic
• Temperature Drift: ±2°C maximum
• Offset Adjustment: Programmable to ±19.9°. This parameter allows the user to apply an offset value to the temperature being displayed.
• Input Impedance: Greater than 100 k?
• Sensor Break: All relays and alarm status LEDs go to alarm state.