Air Purge in Pumping Stations, At pump stations, the motor cage must be purged with air on a continuous basis to prevent vapors from accumulating in the pumping station.

Products >> Applications >> Air Purge in Pumping Stations

Air Purge in Pumping Stations

<< Previous Application

Next Application >>

At pump stations, the motor cage must be purged with air on a continuous basis to prevent vapors from accumulating in the pumping station. Model 3202 vent-captor is well suited to ensure that airflow into the motor cage is not interrupted.

If the fan stops operating, the vent-captor will detect the no flow condition and shutdown the system, or initiate the operation of a backup fan.

Applications

Environmental Cooling Systems (ECS)
Lube Oil Flow Detection in Compressor Lines
Laser Cooling Systems
Weapon Cooling Systems
Oil Cooling Systems
Engine APU Water Cooling Systems
Pulverized Coal Flow Detection
Air Cooling Systems
Agitation Detection
Boiler Feedwater Flow Monitoring
Wastewater Aeration Monitoring
Air Purge in Pumping Stations
Radar Air Cooling Systems
Monitoring Flow through Heat Exchangers
Chemical Injection Flow Monitoring
Drain Line Flow Detection
High/Low Level Alarm & Control
Monitoring Product Flow for Pump Protection
Seal Leak Detection
Monitoring Purge Air Flow
Water Flow Monitoring
Automotive Paint Flow Monitoring
M/C Tool Coolant Flow & Level Monitoring
Diesel Engine Oil Level Monitoring
Nitrogen Purge Low Flow
Air Intake Flow Detection
Detect Saltwater-Flow
Hot Metal Detection
Proximity Detection
High Performance Laser Detector
Ferric Chlorate Dosing
Ferrous Sulphate Dosing
Chemical Dosing
Electrolyte Monitoring
Sampling System
Pump Protection
Automotive Paint Exhaust Monitoring
Cut-off Applications

weber Sensors Inc. 4462 Bretton Court Building 1, Suite 7 Acworth, GA 30101 Tel.: +1 (770) 592 - 6630 Fax. +1 (770) 592 - 6640